Inline Cord Switch - Red Switch (Black Rocker) - Feed Through Switch

This red switch is a great pair for our red vintage polarized 2 prong plug.

Feed through switches are easy to work with: The shell unscrews with 2 screws. Your cord (make sure you have no power going to it!) will have 2 wires, the "neutral" wire will bypass the switch, just run it along the space in the bottom. Cut your "hot" wire in half, strip your ends (we recommend a small piece of electrical tape when using our cloth wire), and attach one end of your "hot" wire to one screw terminal, and attach the other end to the other. Done: lights on, lights off!

This listing is for the Inline cord switch only (a quantity of 1 = 1 switch!!! Wire shown as an example, can be purchased separately!!!)

• UL Listed
• Built-in strain relief system
• 6amp 125volt AC
• 2-1/2" X 1-1/4"
• Works with all of our 2-wire cloth covered electrical wire (twisted and parallel flat wire)
• If you want to use these with our 3-wire cords, you must do so at your own discretion, or the discretion of your electrician. The openings of the switch is not designed for larger diameter round cords